DIY Leather Envelope Clutch

I’ve been wanting to make this DIY for a while now. It’s so easy to make and makes a fun accessory! I made it in just about 4 easy steps. You can use it to hold business cards, money, lip gloss, or whatever!

Here are the instructions and if you don’t feel like making it, purchase it here!


– 9 X 6.5 inches of Leather (I got mine from Tandy Leather)
Leather hole puncher
Business Card Template from Martha Stewart 
Brass Button Studs 
– Pen
– Extra Sharp Scissors
DIY-steps-leather-business-card-clutch DIY Steps:

1. Print out the DIY Leather Business Card Case template from Martha Stewart. Be sure to print it to size. Cut out the pattern and trace it onto the back side of your leather.

2. Cut the leather following the traced pattern as closely as possible.

3. Punch holes on all 4 corners. The top corner will have a slightly larger hole to accommodate for the button.

4. Gather the leather together starting the the inner flaps and finally the bottom flap placing the screw part of the button stud through all three sides of the leather. Screw the top of the button stud on to secure the flaps.

Be sure to check out my lovely jewelrythe infinity and heart ring you see in the image are handmade by me 🙂 



♥ Jou Jou My Love Jewelry


One thought on “DIY Leather Envelope Clutch

Comments are closed.